The IP address 192.168.1.254 is the default private IP address for some home broadband routers and broadband modems. Common routers or modems that use this IP address include 2Wire, Aztech, Billion, Motorola, Netopia, SparkLAN, Thomson, and Westell modems for CenturyLink.

Are you perhaps looking for 192.168.1.2 instead?

About Private IP Addresses

192.168.1.254 is a private IP address and is one of a block of addresses reserved for private networks. This means that a device in this private network cannot be accessed directly from the internet using this address. However, any device on the private network can connect to the other devices on that network.

While the router has the private IP address of 192.168.1.254, it assigns devices in its network a different private address. All IP addresses on a network should be unique within that network to avoid IP address conflicts.

Other common private IP addresses used by modems and routers are 192.168.1.1, 192.168.1.100, and 192.168.1.101.

Accessing the Router Admin Panel

The manufacturer sets the router's IP address at the factory, but you can change it at any time using its administrative interface. To access the router console, open a web browser, go to the address bar, and enterhttp://192.168.1.254 (don't include 'www' like most URLs).

Use this administrative area of the router to change the router's IP address and configure other options.

If you don't know the router's IP address, here's how to locate it in Windows using the Command Prompt:

1. Open Command Prompt by searching for it from the Start menu.

   

2. Enter ipconfig to display a list of the computer's connections.

3. In the Local Area Connectionsection, find Default Gateway. This is the router's IP address.

   

   Your active network connection may not be calledLocal Area Connection. If you don't see that in the command result, scroll through the text and look for a connection with aDefault Gateway.

Default Usernames and Passwords

All routers are shipped with default usernames and passwords. These username and password combinations are standard for each manufacturer. You can usually find a router's password via a sticker on the hardware. The most common are:

• 2Wire: Username: blank, Password: blank
• Aztech: Username: "admin", "user", or blank, Password: "admin", "user", "password", or blank
• Billion: Username: "admin" or "admin", Password: "admin" or "password"
• Motorola: Username: "admin" or blank, Password: "password", "motorola", "admin", "router", or blank
• Netopia: Username: "admin", Password: "1234", "admin", "password" or blank
• SparkLAN: Username: blank, Password: blank
• Thomson: Username: blank, Password: "admin" or "password"
• Westell: Username: "admin" or blank, Password: "password", "admin", or blank

After you have access to the router's administrative console, you can configure the router in several ways. Set a secure username and password combination. Without that, anyone can access the router's panel and change its settings without your knowledge.

Routers may allow users to change other settings, including the IP addresses they assign to devices on the network.